Various Scan Settings

Original orientation

Control panel key

Top edge of original is on the left

ATF015S

Align the original so that its top edge is on your right, turn it rightward or leftward, and then place it face down.

Bottom edge of original is placed first

ATF017S

Align the original, turn it rightward or left- ward, and then place it face down.

Note

You can make the original orientation setting only when the scan size is specified.

Originals are normally rectangular () or horizontally long (). However,

6 the table above uses squares to make original orientation easier to under- stand. Even if the actual shape of the original is different, the combination of original orientation and the orientation specified on the control panel does not change.

122