Preview
Use the Preview screen to check that originals have been scanned correctly.
This section explains about the Preview screen that can be used before sending files by
Before you start scanning, press [Preview]. If you scan originals while [Preview] is selected, the Preview screen appears. You can start or cancel sending the files after checking the preview and the scan settings used for scanning.
❖Preview
ATG017S
1.[Zoom Out] and [Zoom In]
Press to reduce or enlarge the displayed preview.
2.[←][→][↑][↓]
Press to shift the displayed area.
3.[Cancel Sending]
Press to close a preview and interrupt a transmission.
4.[Send]
Press to close a preview and continue a transmission.
Note
5.Display File
Displays a file's name and size.
6.Display Page
Displays the number of the currently displayed page, total number of pages, page size, and color mode.
7.[Switch]
Press to change the page of the selected file that is displayed.
8.Display Position
Displays the position of an image when enlarged.
❒The preview function is not available when scanning originals that are larger than 18 ⋅ 24 inch or A2.
❒Preview is not available if a file is scanned using [Store Only].
❒You can view a stored file using the Preview screen displayed from the list of stored files. For details about viewing a stored file, see "Checking a Stored File Selected from the List".
❒Preview might not be displayed if scanning failed or the image file is corrupt- ed. If this is the case, scan the original again.
Reference
7