C-190 Portable Organ r

Saving your settings as registrations

6.Using the C-190’s memories

The C-190’s settings can be saved in one of two ways: to a global area or to a memory that needs to be selected. The settings of the global area are loaded automatically when the C-190 is switched on.

Saving your settings as registrations

The C-190 comes with 2 x 4 memories where you can save the panel settings (“registrations”) for convenient recall at a later stage.

Here’s what is saved in these memories:

Selected organ registration

Orchestral sound selection

Split point

Coupler II/I status

Voice Palette assignments of the tilt tabs

Tremulant status (on or off)

Melody Orchestra setting

When the C-190 is shipped, these eight memories already contain useful settings, but feel free to overwrite their contents with your own registrations.

(1) Press [M1÷2] to select the memory bank:

[M1/2] off: Bank “1” is selected.

[M1/2] lights: Bank “2” is selected.

(2)Hold down the [SET] button while pressing the [1]~ [4] button that corresponds to the memory where you wish to save your settings.

Loading the settings of a memory

To recall the settings of a memory, proceed as fol- lows:

(1)If necessary, press the [M1/2] button to select the bank that contains the settings you need.

[M1/2] off: Bank “1” is selected.

[M1/2] lights: Bank “2” is selected.

(2)Press [1]~[4] button to load the registration of the corresponding memory.

You can cancel all settings (switch off all tabs) by pressing the [0] button.

Saving settings to the global area

The C-190 also provides a global area whose settings are loaded automatically when the C-190 is switched on.

Here’s what is saved to the global area:

Split point

Reverb status and depth

TUNE setting

Windchest Panning

Voicing settings (see p. 20)

(1) Press and hold the [SET] button.

Note: The settings previously saved in this memory will be overwritten by your new registration.

(2) While holding down [SET], press [0] to save the eligible settings to the global area.

The [0] button briefly lights to confirm that your settings have been stored.

19