2.Getting started

Connecting the adapter

Note: To prevent malfunction and/or damage to the speakers or other devices, always turn down the volume and switch off all devices before making any connections.

(1)Connect the supplied PSB-4U adapter to the DC IN socket on the rear panel of the C-190.

DC IN 12V 2.5A

POWER

USE ROLAND PSB-4U

ADAPTOR ONLY

SWITCH

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

C-190 Portable Organ r

Connecting the adapter

Adjusting the volume

The C-190 has three sliders. The [VOLUME] slider is used to change the global volume. The [PEDAL] slider allows you to set the level of the bass sounds.

VOLUME

PEDAL

MANUAL I

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(2) Connect the other end to an AC outlet.

Global volume (all

Volume of the bass

Volume of the

sections).

tone.

MANUAL I division.

Using the [PEDAL] and [MANUAL¥I] sliders should allow you to create the right balance – even when using the MANUAL II section.

By purchasing an optional EV-5, EV-7 or BOSS FV-300L expression pedal, which you connect to the EXP/SUST socket, you can also set the MANUAL II division’s volume (and/or use the pedal for swelling effects).

Turning the power on and off

Your C-190 is fitted with an amplifier and speakers so that you do not need additional devices.

(1) Turn the volume all the way down.

VOLUME PEDAL

(2)Press the [POWER¥SWITCH] button on the rear panel to turn on the power.

Press at least one tilt tab, because all sounds will be off immediately after switching on the C-190. Adjust the volume to your liking.

Note: Your C-190 is equipped with a protection circuit. A brief interval after power up is required before it will operate nor- mally.

Turning off the power

(1)Set the [VOLUME] slider to the minimum position.

(2)Press the [POWER¥SWITCH] button to turn off the power.

Connecting headphones (sold separately)

The C-190 features two headphone jacks. This allows two people to listen through headphones simulta- neously, making it very useful for lessons. Using headphones allows you to play without bothering others around you, even at night.

(1)Turn the volume all the way down.

(2)Plug a pair of headphones (Roland RH-25, RH-50, RH-200) into a PHONES socket to the left of the C-190’s keyboard.

(3)Adjust the volume.

By connecting headphones to the C-190, you switch off its speakers, which is ideal for playing or practis- ing without disturbing others.

Note: Be sure to use stereo headphones.

Precautions to take when using headphones

To avoid damaging or severing the headphone cord, be sure to handle the headphones by holding the phones themselves, and grasping the plug rather than the cord when pulling the headphone plug.

•Connecting the headphones when the volume of connected equipment is turned up may result in damage to the headphones. Be sure to turn down the volume before connecting headphones.

9