Roland KR103 Selecting User Programs by foot, Selecting a User Program

KR103 Digital Intelligent Piano r

Selecting a User Program

■User Programs and the USR memory

The last Music Style you selected before writing a User Program is also memorized. This even applies to the USR memory that may contain a Style loaded from floppy disk.

The 34 User Programs can be saved to floppy disk as a set (see p. 52).

Selecting User Programs by foot

The KR103 provides a function that allows you to select User Programs with the left or central pedal.

This may come in handy if you programmed several registrations for a song (one for the verse, one for the chorus, one for the solo, etc.) and need to recall them quickly while playing.

ENGLISH

Selecting a User Program

Though the User Program memory you specified above is already selected, there will be times when you need to select another memory. In that case, here is what you need to do:

(1) Press the [User¥Program] button.

This function only works as expected if the various registrations reside in consecutive memories.

			“LFT”
			“CNT”
Function	Part Balance Transpose	Reverb	(1) Press the [User¥Program] button.
	Demo
Volume Brilliance	Balance	User Program
	Accomp Keyboard		Function	Part Balance Transpose	Reverb
				Demo
(2) Use the [√][®] buttons to select the following			Volume Brilliance	Balance	User Program
parameter:				Accomp Keyboard
READ	=120	Ent	(2) Use the [√][®] buttons to select the following
			parameter:
(3) Press the [Enter] button.			PDLSHIFT =120		Ent
			(3) Press the [Enter] button.
			(4) Use the [+][–]buttons to select “Left” (use the left
	Exit	Enter	pedal for User Program selection), “Center” (use
			the central pedal), or “OFF” (no User Program
The display now looks more or less as follows. This			selection).
			Note: If you select “Left” or “Center”, the assignment you
depends on the last User Program you selected.			selected in Function mode (see “Using the pedals as
			switches” on page 37) is ignored.
1Beautifl =120		Ent	(5) Press the [Exit] button to leave this function.

In some cases, the display may contain an asterisk

(“*”). It indicates that the KR103 is still using the last manual changes you may have made before selecting the User Program function.

(4)Use the [+][–]buttons to select the memory (1~34) whose settings you want to load.

(5)Press the [Enter] button to confirm your selection and load the settings.

Note: As soon as you modify any setting (on the front panel or in the Function menu), the asterisk appears next to the User Program number.

47