“MSB” and “LSB” are so-called “Bank Select” messages. “Bank Select” messages are control change messages, which were added when it became clear that the number of sounds that can be selected using program change messages (128) was no longer sufficient to access all sounds of a given instrument.

Send MSB—(0~127, Default setting: 0) Use this param- eter to specify the bank that contains the sound you want to select. Instruments with more than 128 sounds (like the KR103) use several banks.

Send LSB—(0~127, Default setting: 0) Use this parame- ter to specify the group that contains the sound you want to select. Instruments of other manufacturers may also use this message (CC32) to specify the sound bank (the KR103 only uses the value “2”).

Send PC—(1~128, Default setting: 1) “Send PC” are MIDI messages that tell the receiving instrument to select another sound (or Tone). There may be situations where you would like to double the Upper part melody with a sound of an external instrument that is not auto- matically selected. Be sure to first set the “Set MSB” and “Set LSB” parameters before choosing a value for “Send PC”. Otherwise, you may be unable to pinpoint the sound the external instrument should use.

Note: The three “Send” values are only transmitted to an external MIDI instrument (or a sequencer). They have no effect on the KR103 itself.

(3)Press the [Exit] button to leave this function.

KR103 Digital Intelligent Piano r

Editing MIDI parameters

ENGLISH

51