128
Chapter 9 Parameters Guide FX (Effects)
FLANGER
The flanging effect gives a twisting, jet-airplane-like character to the
sound.
TREML (Tremolo)
Tremolo is an effect that creates a cyclic change in volume.
PAN
With the volume level of the left and right sides alternately
changing, when playing sound in stereo, you can get an effect that
makes the guitar sound appear to fly back and forth between the
speakers.
* The pan effect is cancelled if a monaural effect or COSM amp is
connected after the COSM GUITAR effect.
Parameter/
Range Explanation
RATE
0–100,
BPM –BPM
This sets the rate of the flanging effect.
When set to BPM, the value of each parameter will be set according
to the value of the BPM (p. 163) specified for each patch. This makes
it easier to achieve effect sound settings that match the tempo of the
song.
* If, due to the tempo, the time is longer than the range of allowable
settings, it is then synchronized to a period either 1/2 or 1/4 of that
time.
DEPTH
0–100 Determines the depth of the flanging effect.
MANUAL
0 –100 Adjusts the center frequency at which to ap-
ply the effect.
RESO (Resonance)
0–100 Determines the amount of resonance (feed-
back).
Increasing the value will emphasize the ef-
fect, creating a more unusual sound.
SEPARATION
0–100 Adjusts the diffusion. The diffusion increas-
es as the value increases.
LOW CUT (Low Cut Filter)
FLAT, 55 Hz–800 Hz This lets you cut the low-end component be-
low the set frequency to create a clear, dis-
tinct low end, thereby bringing out the high
end of the effect. When FLAT is selected, the
low cut filter will have no effect.
EFFECT LEVEL
0–100 Adjusts the volume of the flanger.
DIRECT LEVEL
0–100 Adjusts the volume of the direct sound.
Parameter/
Range Explanation
WAVE SHAPE
0–100 Adjusts the curve for the volume change.
Raising the value makes the changes occur
more rapidly.
RATE
0–100,
BPM –BPM
Adjusts the frequency (speed) of the change.
When set to BPM, the value of each parameter will be set according
to the value of the BPM (p. 163) specified for each patch. This makes
it easier to achieve effect sound settings that match the tempo of the
song.
* If, due to the tempo, the time is longer than the range of allowable
settings, it is then synchronized to a period either 1/2 or 1/4 of that
time.
DEPTH
0–100 Adjusts the depth of the effect.
Parameter/
Range Explanation
WAVE SHAPE
0–100 Adjusts the curve for the volume change.
Raising the value makes the changes occur
more rapidly.
RATE
0–100,
BPM –BPM
Adjusts the frequency (speed) of the change.
When set to BPM, the value of each parameter will be set according
to the value of the BPM (p. 163) specified for each patch. This makes
it easier to achieve effect sound settings that match the tempo of the
song.
* If, due to the tempo, the time is longer than the range of allowable
settings, it is then synchronized to a period either 1/2 or 1/4 of that
time.
DEPTH
0–100 Adjusts the depth of the effect.
VG-99_e.book 128 ページ ２００７年７月５日　木曜日　午前９時２２分