48
Chapter 4 Global Device Settings (SYSTEM)
Both MAIN OUT and SUB OUT feature four-band EQs. EQ (MAIN)
is applied to the output from MAIN OUT; EQ (SUB) is applied to the
output from SUB OUT.
1.
Press [GLOBAL].
2.
Press PAGE [ ][ ] to display Page 2–5.
3.
Use [F1] – [F6] or the F1 – F6 knobs to adjust
the tone.
This controls the overall threshold value for the noise suppressor
settings in the individual patches. This is an effective tool when
guitars are changed during performances and for making
adjustments in response to noise levels at the performance venue.
This is an overall setting and does not alter the individual patch
settings.
1.
Press [GLOBAL].
2.
Press PAGE [ ] to display Page 6.
3.
Adjust the level with the F1 knob.
This adjusts the noise suppressor threshold levels set in each
patch.
-20 dB – +20 dB
* This adjustment has no effect on patches in which the noise
suppressor is off.
* To use the levels set in the individual patches, set this to 0 dB.
Adjusting the Overall Tone (GLOBAL EQ)
Parameter/
Range Explanation
MAIN EQ (Main Equalizer),
SUB EQ (Sub Equalizer)
A four-band equalizer with high and low ranges is provided. The
sound processed by the effect can be boosted by frequency range be-
fore it is output.
MAIN EQ SW (Main Equalizer Switch),
SUB EQ SW (Sub Equalizer Switch)
OFF, ON Turns the EQ effect on/off.
TOTAL GAIN
-12–+12dB Adjusts the volume before the equalizer.
LOW GAIN
-12–+12dB Adjusts the low frequency range tone.
HIGH GAIN
-12–+12dB Adjusts the high frequency range tone.
LOW MID FREQ (Low Middle Frequency)
20Hz–10.0kHz Specifies the center of the frequency range that will
be adjusted by the LOW MID GAIN.
LOW MID Q (Low Middle Q)
0.5–16 Adjusts the width of the area affected by the EQ
centered at the LOW MID FREQ.
Higher values will narrow the area.
LOW MID GAIN (Low Middle Gain)
-12–+12dB Adjusts the low-middle frequency range tone.
HIGH MID FREQ (High Middle Frequency)
20Hz–10.0kHz
Specifies the center of the frequency range that will be
adjusted by the HIGH MID GAIN.
HIGH MID Q (High Middle Q)
0.5–16 Adjusts the width of the area affected by the EQ
centered at the HIGH MID FREQ.
Higher values will narrow the area.
HIGH MID GAIN (High Middle Gain)
-12–+12dB
Adjusts the high-middle frequency range tone.
Controlling the Overall Effect of the Noise Suppressor (Total NS)
VG-99_e.book 48 ページ ２００７年７月５日　木曜日　午前９時２２分