Roland VG-99 , LCD CONTRAST, DIRECT PATCH, , SYSTEM, GK SETTING,

166
Chapter 9 Parameter Guide SYSTEM
LCD CONTRAST
DIRECT PATCH
GK SETTING
SYSTEM
Parameter/
Range Explanation
CONTRAST
1–50 Setting up the VG-99 in certain positions
may make the display difficult to read. If
this occurs, adjust the display contrast (legi-
bility).
Parameter/
Range Explanation
DIRECT PATCH
DIR.PATCH 1–5 This sets the desired [DIRECT PATCH 1]–
[DIRECT PATCH 5].
Parameter/
Range Explanation
GK CONNCT (GK Connect)
AUTO This automatically determines the GK con-
nection and switches the internal settings.
When the GK connection is in use, the GUI-
TAR INPUT connection is disabled.
OFF Use this setting if you normally use the con-
nection for GUITAR INPUT.
ON Use this setting if you are normally using a
GK connection.
GK FUNC (GK Function)
GK VOL (GK Volume)
This selects the function assigned to GK VOL.
For more on the functions assigned, refer to the GK
VOL column in “Parameters That Can Be Assigned
to Separate Controllers” (p. 168).
GK S1, S2 (GK S1, S2 Switch)
This selects the functions assigned to GK S1, S2.
For more on the functions assigned, refer to the GK S1,
S2 column in “Parameters That Can Be Assigned to
Separate Controllers” (p. 168).
SET MODE
This setting allows you to select whether one GK SETTING is used
globally for the entire VG-99 or if different GK SETTINGS are speci-
fied for each patch individually.
SYSTEM The GK SETTING set here is used globally
for the entire VG-99. This is the default fac-
tory setting.
PATCH GK SETTINGS are specified for each patch
individually. Carry out the Write procedure
after making changes to the settings in each
patch. Use this setting when performing
with multiple guitars, switching the instru-
ment depending on the patch used.
SETTING1–10
1–10 This selects the GK SETTING to be set.
NAME
This sets the name for the GK SETTING (up to eight characters).
INSERT Insert a space at the cursor location.
DELETE Delete a character. The characters that fol-
low get shifted to the left.
SPACE Input a space at the cursor location.
A0! Switch between uppercase letters, numbers,
and characters.
A<=>a Switch between uppercase letters and low-
ercase letters.
VG-99_e.book 166 ページ ２００７年７月５日 木曜日 午前９時２２分