170
Chapter 9 Parameter Guide SYSTEM
MIDI
Parameter/
Range Explanation
MIDI CH (MIDI Channel)
1–16ch This sets the channel used for transmitting
and receiving MIDI messages.
When controlling another synthesizer
sound module using the GUITAR TO MIDI
function, also refer to
“GUITAR TO MIDI”
(p. 164).
OMNI MODE
OFF, ON When MIDI OMNI MODE is set to ON,
messages are received on all MIDI channels,
regardless of the MIDI channel settings.
DEVICE ID
1–32 This sets the Device ID used for transmis-
sion and reception of Exclusive messages.
SYNC CLOCK
This setting determines the basis used for synchronizing the timing
for effect modulation rates and other time-based parameters.
INTERNAL Operations are synchronized to the VG-99’s
internal Clock.
AUTO (USB) Operations are synchronized to the MIDI
Clock received via USB. However, opera-
tions are automatically synchronized to the
VG-99’s internal Clock if the VG-99 is un-
able to receive the external Clock.
AUTO (MIDI) Operations are synchronized to the MIDI
Clock received via MIDI. However,
operations are automatically synchronized
to the VG-99’s internal Clock if the VG-99 is
unable to receive the external Clock.
AUTO (RRC2) Operations are synchronized to the MIDI
Clock received via the RRC2 connector.
However, operations are automatically syn-
chronized to the VG-99’s internal Clock if
the VG-99 is unable to receive the external
Clock.
MIDI
MIDI IN
This sets the routing of signals arriving at the MIDI IN connector.
OFF Signals are not received at MIDI IN.
MAIN Signals received at MIDI IN are transmitted
to the VG-99’s internal section.
Parameter/
Range Explanation
MIDI OUT
This sets the routing of signals at the MIDI OUT connector.
OFF Signals are not output from MIDI OUT.
MAIN Signals from the VG-99 are output.
USB MIDI signals received via USB are output.
MIDI The MIDI signals received at MIDI IN are
output from MIDI OUT (thru).
When other signals also are set to be output
simultaneously from MIDI OUT, the signals
are mixed and then output together
(merge).
RRC2 The MIDI signals received at through RRC2
are output from MIDI OUT (thru).
When other signals also are set to be output
simultaneously from MIDI OUT, the signals
are mixed and then output together
(merge).
USB (MIDI)
→
This sets the routing of signals received via USB.
OFF Signals are not received via USB.
MAIN Signals received via USB are transmitted to
the VG-99’s internal section.
USB (MIDI)
←
This sets the routing of signals output from the USB connector.
OFF Signals are not output from the USB connec-
tor.
MAIN MIDI signals from the VG-99 are output.
MIDI MIDI signals received at MIDI IN are out-
put.
RRC2 MIDI signals received through RRC2 are
output.
RRC2
→
This sets the routing of signals received via RRC.
OFF Signals are not received through RRC2.
MAIN Signals received at the RRC2 connector are
transmitted to the VG-99’s internal section.
RRC2
←
This sets the routing of signals output from the RRC2 connector.
OFF Signals are not output from the USB connec-
tor.
MAIN MIDI signals from the VG-99 are output.
USB MIDI signals received via USB are output.
MIDI MIDI signals received at MIDI IN are output
from the RRC2 connector (thru). When oth-
er signals also are set to be output simulta-
neously from the RRC2 connector, the
signals are mixed and then output together
(merge).
VG-99_e.book 170 ページ ２００７年７月５日　木曜日　午前９時２２分