19
Chapter 1 Outputting Sounds
Chapter 1
The VG-99 has a variety of Play screen variations, each providing
different information about the current state of the VG-99.
You can switch the information shown in the Play screen by pressing
PAGE [ ] [ ].
Screen 1:
The first nine characters of the patch name are displayed in large
type; also shown are icons for the guitars and amps in both channels.
fig.01-060d
Screen 2:
All sixteen characters of the patch name are displayed.
Screen 3:
The effects used, as well as their connection sequence (CHAIN) in
both channels are indicated.
Screen 4:
The screen shows level meters for the GK IN strings 1–6, normal
pickup, MAIN OUT, and SUB OUT levels.
By assigning parameters to the F1–F6 knobs, as
described in
“Changing the Sounds with the Knobs
as You Play (DIRECT EDIT)”
(p. 82), you can use them
to control values while in the Play screen. Additionally,
you can display a popup for the assigned parameters
and their values by pressing the [F1]–[F6] buttons.
Some screens may contain parameters spanning multiple pages. The
page number is indicated at the upper right of the screen.
1.
Use PAGE [ ] [ ] to switch pages.
2.
Use [F1]–[F6] or the F1–F6 knobs to change
the values.
Pressing a FUNCTION button while SET** appears in
the lower part of the screen sets the corresponding
function to the indicated value of **.
About the Play Screen About the Information in the Display (Basic Operation)
VG-99_e.book 19 ページ ２００７年７月５日　木曜日　午前９時２２分