85
Chapter 8 Other Functions
Chapter 8
F4: MODE (GK S1, S2 only)
This specifies how the switches function.
* Combinations of the actions below are possible.
S1: DEC / S2: INC
S1: INC / S2: DEC
S1: MIN / S2: MAX
S1: MAX / S2: MIN
F5: RANGE LOW (only when an expression pedal or other controller
that changes values in a continuous, non-discrete way is set as
the source)
This sets the minimum for the range in which the value of the
setting can be changed.
F6: RANGE HIGH (only when an expression pedal or other
controller that changes values in a continuous, non-discrete way
is set as the source)
This sets the maximum for the range in which the value of the
setting can be changed.
Available Settings ExplanationINC
The value increases.
DEC
The value decreases.
MIN
The value is set to the minimum.
MAX
The value is set to the maximum.
About the Range of Targets’ Change
The target’s value changes between MIN (the minimum value)
and MAX (the maximum value).
When a foot switch or other controller that switches settings on
and off is used, OFF sets the minimum value and ON sets the
maximum value.
When an expression pedal or other controller that changes
values in a consecutive manner is used, the value changes
within the range between MIN and MAX.
When an expression pedal or other controller that changes
values in a consecutive manner is used to control a two-value
(On/Off) parameter, the controller functions as shown below.
200%
MIN
0%
MAX
Off On
Footswitch
Value
0
127
Degree to
Which Expression
Pedal Is Depressed
EXP Pedal
When the pedal
is fully raised
When the pedal
is fully advanced
200%
MIN
0%
MAX
Value
0
127
EXP Pedal
When the pedal
is fully raised When the pedal
is fully advanced
When the pedal
is advanced halfway
OFF
ON
Value
Degree to
Which Expression
Pedal Is Depressed
VG-99_e.book 85 ページ ２００７年７月５日　木曜日　午前９時２２分