40

Chapter 3 Creating Your Own Effect Types (CUSTOMIZE)

* You cannot customize the speaker when BASS AMP VINTAGE or
BASS AMP MODERN is selected with PREAMP TYPE.
1.
Press [COSM AMP].
The COSM AMP Edit screen appears.
2.
Press PAGE [ ] [ ] to display the Speaker
Type selection screen.
3.
Select CUSTOM as the SP TYPE with [F1]
(SELECT) or the F1 knob.
4.
Press PAGE [ ] to display the speaker
customization screen.
5.
Adjust the desired parameter with [F1]–[F5] or
with the F1–F5 knobs.
For detailed information on all the parameters, refer to
“COSM AMP”
(p. 140).
6.
If you want to save the edited settings,
perform the Write procedure (p. 38).
* If not saving the settings, press [EXIT] to return to the Play screen.
1.
Press [FX].
The FX Edit screen appears.
2.
Press PAGE [ ] to display Page 1.
3.
Press [F2] (OD/DS).
4.
Select CUSTOM as the OD/DS TYPE with [F2]
(SELECT) or the F2 knob.
5.
Press PAGE [ ] to display Page 2.
6.
Select the basic type with [F1] (SELECT) or the
F1 knob.
7.
Adjust the desired parameter with [F1]–[F5] or
with the F1–F5 knobs.
If there are other parameters you want to adjust, press PAGE
[].
8.
Repeat Steps 6 and 7 as needed.
For detailed information on all the parameters, refer to
“OD/DS (Overdrive/Distortion)”
(p. 120).
9.
If you want to save the edited settings,
perform the Write procedure (p. 38).
* If not saving the settings, press [EXIT] to return to the Play screen.
Customizing the Speaker Customizing the Overdrive/Distortion
VG-99_e.book 40 ページ ２００７年７月５日　木曜日　午前９時２２分