46
Chapter 4 Global Device Settings (SYSTEM)

This setting determines whether the VG-99 uses a single global GK
setting or if the GK settings can be specified individually for each
patch.

1.

Follow Steps 1–3 in “Selecting the Settings”
(p. 42) to display the GK SETTING screen.

2.

Press PAGE [ ] to display Page 1.

3.

Use [F3] (SELECT) or the F3 knob to select the
setting.

This sets the function for the GK-3’s GK Volume and DOWN/S1,
UP/S2 switches.

1.

Follow Steps 1–3 in “Selecting the Settings”
(p. 42) to display the GK SETTING screen.

2.

Press PAGE [ ] to display Page 1.

3.

Press [F2] (GKFUNC).

4.

Set the parameter you want to assign with [F1]
(SELECT), [F6] (SELECT) or the F1, F6 knob.

For detailed information on the parameters that can be
assigned, refer to

“GK VOL (GK Volume)”

(p. 166) and

“GK S1, S2 (GK S1, S2 Switch)”

(p. 166).

* When assigning functions to each patch for DOWN/S1 and UP/S2,
set Control Assign to ASSIGNABLE (PATCH). With other
settings, the assignment settings in the patches are disregarded.
* This is the same setting as that set with GK VOL or GK S1, S2 in
[SYSTEM] (CTL).

The VG-99 includes a function for adjusting the overall tone produced
by the device. This is referred to as the Global function. You can use the
Global function to adjust the overall sound of the VG-99 to suit the
equipment being used or environment you are in without altering the
individual patches.
The VG-99 can store ten separate Global function settings (1–10).
After you have finished inputting the various settings, press [EXIT]
one or more times to return to the Play screen.

1.

Press [GLOBAL].

2.

Press PAGE [ ] to display Page 1.

The Global screen appears.

3.

Select any setting 1–10 with [F1] (SELECT) or
the F1 knob.

The following parameter settings are stored to their
corresponding areas in memory.

Using Different Guitar Settings

in Each Patch (SET MODE)

Settings Explanation

SYSTEM
The GK SETTING set here is used globally for
the entire VG-99.
This is the default factory setting.
PATCH
The GK Settings can be specified individually
for each patch.
Use this setting when switching among multi-
ple guitars as you perform.

Determining the Function of the

GK Volume Control and DOWN/

S1, UP/S2 Switches (GK FUNC)

Adjusting Overall Tone According to the Environment (GLOBAL/OUTPUT SELECT)

Selecting the Settings

VG-99_e.book 46 ページ 2007年7月5日 木曜日 午前9時22分