Samsung 7100 Before Installing, Site Information, Safety Conditions, Temperature and Humidity

OfficeServ 7100 Installation Manual

CHAPTER 1. Before Installing

This chapter describes items to check when inspecting the installation site and the grounding and power conditions before installing the OfficeServ 7100 system. This chapter also describes the items included in the OfficeServ 7100 package and the installation procedure.

1.1 Site Information

Select a site that satisfies the following conditions for safety, temperature and humidity:

1.1.1 Safety Conditions

yThe OfficeServ 7100 system should not be installed near materials that can cause a fire, such as explosive gas and inflammables.

yThe OfficeServ 7100 system should not be near equipments that generate electromagnetic waves, such as monitors or copying machines.

yThe installation location should be convenient for distributing trunk lines and extension lines, for connecting power and grounding wires, and for maintenance and repair.

yThe OfficeServ 7100 system should not be installed in aisles or passageways that are populated or used for moving equipment.

yAlways maintain cleanliness to prevent dust from damaging the board-connecting part of the cabinet.

yBefore installing the OfficeServ 7100 system, check items such as the electric wiring status, grounding status, voltage and frequency.

1.1.2Temperature and Humidity

yThe conditions for temperature and humidity are as follows:

−Operation Temperature: 0~40°C

−Storage temperature: -10~50°C

−Humidity: 10~90%

yCool area without direct sunlight

yVentilators should be installed to remove dust.

© SAMSUNG Electronics Co., Ltd. 1-1