Samsung 7100 Mounting Interface Boards, Setting Switches and Mounting Optional Boards

CHAPTER 3. Ошибка! Стиль не определен.

3.3 Mounting Interface Boards

This section describes how to set jumpers and switches of an interface board, how to mount optional boards to an interface board, and how to mount interface boards into slots.

3.3.1 Setting Switches and Mounting Optional Boards

These interface boards are divided into the boards to set switches or jumpers and the boards to mount option boards.

Table 3.5 Interface Board for Switches/Jumper Setting

Interface Board	Jumper/Switch Setting	Jumper/Switch Function
TEPRI	S1(SW1~SW8)	Setting E1, T1/E1/PRI, 24B+D/24B,
		User/Network and 17H/13H
TEPRI2	S2(1~4)	Setting T1, E1, T1/E1,PRI, 24B+D/24B,
	S3(1~4)	User/Network and 1AH

TEPRI(a/2) Cards is only support E1(1) PRI function, but not supports for

E1(T1) Digital Trunk function.

Table 3.6 Interface Boards that can mount option boards

Interface Board	Option Board
MP10(MP11)	4DLM or 4SWM, MODEM
UNI	4TRM, 2BRM, 4DLM, 4SLM

4SWM Module board supports not 10M LAN interface but 100M LAN interface. 4TRM Module board supports not Dial Pulse dialing but DTMF dialing. 8TRK Card supports DTMF and Dial Pulse dialing

3-6 © SAMSUNG Electronics Co., Ltd.