Samsung 7100 installation manual Mounting UNI Board

OfficeServ 7100 Installation Manual

3.3.1.1 Mounting UNI Board

The UNI board has three connectors to mount option boards and the mountable modules are 4TRM, 2BRM, 4DLM and 4SLM. For user’s purpose, up to three modules can be mounted regardless of the type of the option module. Module1, Module2 and Module3 are positioned on the basis of the front panel of the UNI board, and the interface of the corresponding module is marked on the front panel of the UNI board.

Align the module to be mounted to the top connector(16-pin connector). After that, match the bottom connector(100-pin connector). Mount two connectors grasping both connectors. Lock the supporter between the grooves and the top of each option board with screws.

4SLM

4TRM

Figure 3.7 Mounting the UNI Board

© SAMSUNG Electronics Co., Ltd. 3-7