Samsung 7100 installation manual List of Figures

Ошибка! Стиль не определен.

LIST OF FIGURES

Figure 2.1 Tools for the Installation inside a Rack		2-4
Figure 2.2 Rack Installation (1)		2-4
Figure 2.3 Rack Installation (2)		2-4
Figure 2.4 Rack Installation (3)		2-4
Figure 2.5 Required Tools for the installation on a Wall		2-4
Figure 2.6 Installation on a Wall (1)		2-4
Figure 2.7 Installation on a Wall (2)		2-4
Figure 2.8 Installation on a Wall (3)		2-4
Figure 2.9 Installation on a Wall (4)		2-4
Figure 2.10 Installation on a Wall (5)		2-4
Figure 2.11 Installation on a Wall (6)		2-4
Figure 2.12	Installation on a Wall (7)	2-4
Figure 2.13	Grounding	2-4
Figure 3.1 Front/rear View of OfficeServ 7100 Cabinet		3-4
Figure 3.2 Setting Switches of MP10/11 Board		3-4
Figure 3.3 Mounting a Modem Board on the MP10/11 Board		3-4
Figure 3.4 Mounting 4SWM/4DLM on the MP10/11 Board		3-4
Figure 3.5 Mounting the Control Board to Slot 0		3-4
Figure 3.6 Inserting the Control Board to a connector of the Main Board		3-4
Figure 3.7 Mounting the UNI Board		3-4
Figure 3.8 Setting the Switch of the TEPRI Board		3-4
Figure 3.9 Setting Switches of the TEPRI2 Board		3-4
Figure 3.10	PLIM Board	3-4
Figure 3.11 Mounting an Interface Board on a Slot		3-4
Figure 3.12 Inserting a control Board to the Connector of the Main Board		3-4
Figure 3.13 Connecting Power Fail Transfer to a 16SLI2/8SLI Board		3-4
Figure 3.14 Turning the Cabinet Power Off		3-4
Figure 3.15 Removing a Board		3-4
Figure 3.16 Replacing a New Board		3-4
Figure 4.1	Connecting an External Battery	4-4
Figure 5.1 Connecting the Power (use of a cabinet)		5-4
Figure 6.1 RJ-45 Port of 4TRM//8TRK Board		6-4
Figure 6.2 RJ-45 Port(T-Mode only) of 2BRM Board		6-4

XIV © SAMSUNG Electronics Co., Ltd.