OfficeServ 7100 Installation Manual
3.2.2 Mounting Control Boards
Mount a control board to the slot 0 of the OfficeServ 7100 cabinet. For the locations of slot 0 to slot 2, refer to ‘3.1. Cabinet Configuration’.
| Table 3.4 Control Board Types |
|
|
Control Board | Mountable Slot |
MP10/11 | Slot 0 of the Basic Cabinet |
|
|
Mount the MP10/11 board as follows:
1)Check if the MP10/11 board to be mounted is damaged.
Caution for the power when mounting boards
Check if the cabinet power is off when mounting boards on slots. Inserting or ejecting a board while the power is on may damage the board or cause fire.
2)Align the MP10/11 board to the guardrail of slot 0 of the basic cabinet, and slide the board into the slot with care.
Figure 3.5 Mounting the Control Board to Slot 0
3)Press and lock the lever on the front panel of the MP10/11 board to fully insert to the connector of the OfficeServ 7100 connector.
Figure 3.6 Inserting the Control Board to a connector of the Main Board
© SAMSUNG Electronics Co., Ltd. |
