OfficeServ 7100 Installation Manual
3.3.2 Mounting Interface Boards to Slots
The interface boards are mounted to Slot 1 and Slot 2 of the cabinet. The available slot positions ‘3.1 Cabinet Configuration’.
|
|
|
| Table 3.7 | Interface Board Types and Available Slots | |
|
|
|
|
|
|
|
|
| Category |
|
| Interface Board | Slots Available |
|
| Voice C.O. line |
| TEPRI, TEPRI2 | Slot 1 and Slot 2 of the cabinet | |
|
|
|
|
|
|
|
|
|
|
| 8TRK, UNI |
| Slot 1 and Slot 2 of the cabinet |
|
|
|
|
|
| |
|
| Voice extension |
| 16DLI2, 8DLI, 16SLI2, 8SLI, 8Combo, UNI | Slot 1 and Slot 2 of the cabinet | |
|
|
|
|
|
|
|
|
| Data voice |
| MGI, MGI64 |
| Slot 1 and Slot 2 of the cabinet |
|
| application |
|
|
|
|
|
|
| LIM |
| Slot 1 and Slot 2 of the cabinet | |
|
|
|
|
| ||
References
For the detailed features and functions for each interface board, refer to ‘OfficeServ 7200 System manual’.
The Procedure for mounting the interface board to each slot is as follows:
1)Check the exterior of the interface board for any damages.
2)Align each Interface board to the guardrail of the universal slot of the OfficeServ 7100 basic cabinet or expansion cabinet, and slide the Interface board into the slot.
Figure 3.11 Mounting an Interface Board on a Slot
© SAMSUNG Electronics Co., Ltd. |
