4.Take a new paper transfer belt out of its package.
•Don't use sharp objects, such as a knife or scissors, to open the paper transfer belt package. You could damage the surface of the paper transfer belt.
•Be careful not to scratch the surface of the paper transfer belt.
5.Holding the handle on the new paper transfer belt, align it with the slots on the inside of the front cover.
6.Lower the paper transfer belt until it is parallel with the front cover and firmly seated.
7.Close the front cover firmly.
8.Turn the machine on.
MAINTENANCE PARTS
To avoid print quality and paper feed problems resulting from worn parts, and to maintain your machine in top working condition the following condition, the following items will need to be replaced after the specified number of pages, or when the life span of each item has expired.
ITEMS | YIELD (AVERAGE) |
|
|
Fuser unit | Approx. 100,000 pages |
|
|
DADF (or ADF) friction pad | Approx. 20,000 pages |
|
|
DADF (or ADF) | Approx. 80,000 pages |
|
|
Approx. 70,000 pages | |
FCFa, Optional tray 2) |
|
Friction pad | Approx. 70,000 pages |
FCF, Optional tray 2) |
|
a. First cassette feeder (Tray1) |
|
We highly recommend that this maintenance be performed by an authorized service provider, dealer or the retailer where you bought the machine. The warranty does not cover the replacement of the maintenance parts after their lifespan.
Checking replaceables
If you experience frequent paper jams or printing problems, check the number of pages the machine has printed or scanned. Replace the corresponding parts, if necessary.
1.Press Menu ( 
) until System Setup appears on the bottom line of the display and press OK.
2.Press the left/right arrow until Maintenance appears and press OK.
3.Press the left/right arrow until Supplies Life appears and press OK.
4.Press the left/right arrow until the item you want appears and press OK.
•Supplies Info: Prints the supply information page.
•Total: Displays the total number of pages printed.
•ADF Scan: Displays the number of pages scanned using the ADF.
•Platen Scan: Displays the number of pages scanned using the scanner glass.
•Transfer Belt, Fuser, Tray1 Roller, Tray2 Roller, MP Tray Roller: Displays the number of pages printed each item.
5.If you selected to print a supply information page, press OK to confirm.
6.Press Stop/Clear to return to ready mode.
