Setting the Date and Time
Your COMBI VISION contains a 24-hour clock and calendar used
to:
◆Preset the VCR to record up to six programmes
automatically over a period of one month
◆Switch the set on or off automatically at a specific time
You must set the date and time when:
◆You purchase the COMBI VISION
◆The power supply is switched or cut off
1Press MENU ( ) on the remote control.
Result:The television menu is displayed.
2Select the option by pressing P ▲or ▼ the appropriate number of
times, followed by the + button.
Result:The current date and time are displayed.
3Enter the hour and then the minutes by pressing the numeric buttons.
➢When a time is entered, all single digits must be preceded by a
zero.
Example:3:07 p.m.
Enter 15:07
4To select the date, press P ▼.
5Press the numeric, + or - buttons to enter the:
◆Day
◆Month
◆Year
Result:The day of the week is displayed automatically next to the date.
➢When a date is entered, all single digits must be preceded by a
zero.
Example:6th April 2000
Enter 06/04/00
6When you are satisfied with your settings, press MENU ( ) twice to
return to normal viewing.
➢If you do not press a button for more than 30 seconds, the
display disappears automatically.
If you make a mistake when entering the date or time,
press the
-
button one or more times to return to the
incorrect figure and enter the correct one.
You cannot set the date and time during a programmed
recording.
12
MENU
PICTURE
TUNE
SETUP
--:--
ADJUST SELECT EXIT
TIME : 15:07
DATE : 06/04/00 THU
ADJUST SELECT EXIT
GB
V.MENU MUTE
DISPLAY P.STD
MENU
P
P
Pre.
02255A_eng1_mono 6/29/04 10:42 AM Page 12