Samsung Colour TV/VCR , Setting the VCR Unit to Record ...

This function enables you to preset the VCR unit to record a

programme up to one month before that programme is to be

broadcast. Up to six programmes can be preset.

You must provide the following information on the broadcast to be

recorded:

◆Programme number

◆Recording speed (LP option)

◆Start time

◆End time

◆Date

◆Recording mode (once, daily, weekly)

◆Optional use of a decoder

Before presetting your VCR:

◆Check that the language, date and time are correct (if

the clock has not been set, the Date/Time Setting

function is activated automatically)

◆Insert the cassette on which the programme is to be

recorded (safety tab intact)

1Press V.MENU ( ).

Result:The VCR menu is displayed.

2Select the RECORDPROGRAMME option by pressing the + button.

Result:The list of preset recordings is displayed.

3Select a line that is free (no recording set) by pressing the P ▲or ▼

buttons one or more times.

4Press the + button to confirm your selection.

Result:The list of information to be entered for the recording is

displayed with preset values.

5Enter the channel number by pressing the appropriate numeric buttons or

press INPUT ( ) to select the AV input.

6Specify the start time by pressing the appropriate numeric buttons. When

you are satisfied, press the P ▼button.

☛When entering the date and time, all single digits must be preceded

by a zero.

Example:7:30 am

Enter 07:30

If an invalid number is entered, the previous value is redisplayed.

Enter the information again. If you make a mistake, press the

- button several times to move backwards until the incorrect digit is

cleared and then enter the correct number.

Setting the VCR Unit to Record ...

VCR MENU

RECORD PROGRAMME

REPEAT : OFF

PICTURE : NORMAL

TAPE SELECT : E180/T120

V.SYSTEM : AUTO

ADJUST SELECT EXIT

PR. START STOP DATE

-- --:-- --:-- --/--

X:CLEAR EXIT

ADJUST SELECT

15:07 06/04/00 THU

PR. : 01

START : 16:50

STOP : 18:30

DATE : 08/04 SAT

MODE : ONCE

DECODER : ON

SPEED : SP

PDC : OFF

ADJUST SELECT EXIT

V.MENU MUTE

DISPLAY P.STD

02255A_eng3_mono 6/29/04 10:47 AM Page 32