Samsung Colour TV/VCR manual Changing Stations, Selecting a Station Numbered Ten or Over

Changing Stations

Once you have stored the channels on your COMBI VISION, you can select them easily via your remote control.

To switch...	Press...
To the next station	P ▲.
To the previous station	P ▼.
To the station of your choice	The appropriate numeric button(s);
	see the section below for further details.
Repeatedly between the last	PRE-CH (	) as many times as you require.
two stations displayed

V.MENU MUTE

	P
	MENU
	P
DISPLAY	P.STD

Pre.

P 02

Selecting a Station Numbered Ten or Over

When selecting a station stored at programme position ten or higher, follow the instructions below.

1Press the -/--button on the remote control.

Result: P--is displayed in the top left-hand corner of the screen.

2Enter the two-digit station number.

Example: To select station 42, press 4 followed by 2.

3To enter one-digit station numbers:

◆Precede the number with a zero (0) or

◆Press the -/-- button again

Result: P- is displayed; you can now enter the required one-digit number without a zero.

Pre.

P--

15