Recording a Programme Directly
|
| INPUT | |
|
|
| Pre. |
V.MENU | MUTE | ||
| P |
|
|
| MENU |
| |
| P |
|
|
GB |
| P.STD | |
DISPLAY | |||
REC | EJECT | P/S | CRYSTAL PB |
| INDEX | MEMORY | SLEEP |
Before recording a programme, you must have stored the corresponding channel. If you have not done so, refer to page 13 or 16 for more details.
➢◆ If you have 1 tuner model, you cannot record one programme while watching another.
◆If you have dual tuner model, you can record one programme while watching another.
1Select:
◆The TV station to be recorded using the P ▲ or ▼ buttons or
◆The AV source using the INPUT ( 
) button for a satellite tuner or external video source
Result: The channel number is displayed and the programme can be seen on the television.
2Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape.
3Hold REC ( 
) down for at least two seconds to start recording.
Result: The record indicator appears on the screen. An index is recorded on the tape (see page 36).
During recording you can also press DISPLAY ( 
) to display the number of the programme being recorded and the remaining time on the cassette.
4 | To... | Then press... |
Stop recording temporarily (to avoid recording | P/S ( |
|
| ). |
| |
|
|
| ||||
TV spots or to change channels for example) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Start recording again | P/S ( |
|
| ) or REC ( ). | ||
|
| |||||
|
| |||||
|
|
|
|
|
|
|
Stop recording completely | STOP ( |
|
| ) once. | ||
|
| |||||
|
| |||||
|
|
|
|
|
|
|
➢If the VCR is left in Pause mode for more than ten minutes, recording will be stopped automatically to protect the heads and the cassette.
➢If the cassette is ejected when you start recording, check that the safety tab is intact or the opening is covered with adhesive tape.
If you reach the end of the tape while recording, the cassette rewinds automatically.
28
