Storing the Stations Manually (cont.)
5When the station to be stored appears on the screen, select the NEW PR. option by pressing P ▲ or P ▼ the required number of times.
6Enter the programme number to be assigned to the channel using the numeric, + or - buttons.
7Press MEMORY (
) to store the station.
Result: 
:STORE is displayed briefly in red.
8To store other stations, return to Step 4.
Otherwise, press MENU ( 
) the appropriate number of times to return to normal viewing.
➢◆ If you wish to cancel the operation without storing the station, press MENU ( 
) before you press MEMORY ( 
).
◆If you have already stored the station, you can clear it and replace it with a different station.
To clear a station, refer to the section entitled “Storing and/or Clearing the Stored Stations” on page 14.
CURRENT PR. | : P O |
| |
NEW PR. |
| : P 1 |
|
NAME |
| : - - - - - | |
SEARCH |
| : |
|
FREQUENCY | : 192.00MHz | ||
AFT |
| : ON |
|
:STORE | X:CLEAR | EXIT | |
ADJUST |
| SELECT | |
REC | EJECT | P/S | CRYSTAL PB |
| INDEX | MEMORY | SLEEP |
TRK | LANG.SEL | CLEAR |
|
P 02
Activating the 3DB LNA (Low Noise Amplifier) Feature (depending on the model)
This function is very useful in the situation that the TV is used in weak signal. LNA amplifies the TV signal in the weak signal area, but not noise.
This feature is working only weak signal condition, and that is memorized on current channel, additional.
1Press the MENU button ( 
).
Result: The television menu is displayed.
2Select the SETUP option by pressing P ▲ or ▼ buttons one or more times, followed by the + button.
3To activate this feature, press the + button to set the 3DB LNA option to
ON.
4Press the MENU button ( 
) the required number of times to return to normal viewing.
5If you wish to deactivate this feature, repeat the procedure and set the
3DB LNA option to OFF.
MENU |
PICTURE |
TUNE |
SETUP |
ADJUST | SELECT | EXIT |
SETUP |
|
|
PANEL LOCK | : OFF |
|
ON TIMER | : OFF |
|
3DB LNA | : ON |
|
ADJUST | SELECT | EXIT |
17
