connecting & setting up
C. Move the Set top/Cable Box's remote across the front of the Set top/Cable | Figure 2 |
Box while pressing the remote's power button On and Off (Figure 2). |
|
| |
|
|
(Press and release the power button each time you move the remote; holding down the button will not work.)
D. When the Set top/Cable box powers On, you have found the sensor.
E. Remember the location of the sensor.
3.Placing the IR Blaster.
Place the Set top/Cable box controller of the IR Blaster on top or underneath the Set top/Cable box approximately 1 inch in front of the sensor you found in 2 .
Use the
M You must select a Set top/Cable box brand from the table on pages 42~44. If you do not know the brand name, please contact your cable provider.
After setting up your Set top/Cable box or satellite receiver with the DVD Recorder & VCR through the IR Blaster cable, you need to set up the Set top/Cable Box Control menu. (See page 41)
The DVD-VR375 does not have a TV Tuner.
20_ connecting & setting up
