NOTE
Do not forget to reset the clock when you switch to and from summer and winter time.
The oven heats the water for 4 or 5 minutes. The water should then be boiling.

Oven use

Checking that your oven is operating correctly

The following simple procedure enables you to check that your oven is working correctly at all times. If you are in doubt, refer to the section entitled “Troubleshooting” on the page 75-80.

NOTE

The oven must be plugged into an appropriate wall socket. The turntable must be in position in the oven. If a power level other than the maximum (100 % - 900 W) is used, the water takes longer to boil.

Open the oven door by pulling the handle on the upper side of the door.

Place a glass of water on the turntable. Close the door

Press the START/+30s button and set the time to 4 or 5 minutes, by pressing the START/+30s button the appropriate number of times.

Result:

use Oven

Setting the time

When power is supplied, “88:88” and then “12:00” is automatically displayed on the display. Please set the current time. The time can be displayed in either the 24-hour or 12-hour notation. You must set the clock:

• When you first install your microwave oven

• After a power failure

1

1.

Press the Multi Function Selector Dial.

2.

Turn the Multi Function Selector Dial to

 

2

 

set time display type. (12H or 24H)

33. Press the Multi Function Selector Dial to

4

 

complete the setup.

4.

Turn the Multi Function Selector Dial to

 

set the hour.

24  English

MC32J7055CT_EG_DE68-04319B-00_EN.indd 24

 

 

2014-12-22 ￿￿ 11:00:14