
Maintenance
03
03
02
01
01Support clip 1
02Support clip 2
03Support clip 3
Maintenance
56 English
5.Remove the third sheet from the door in the arrow direction.
6.Clean the glass with soapy water and a clean cloth.
7.When done, reinsert the sheets as follows:
•See the picture and locate the hinges. Insert sheet 3 below support clip 1, sheet 2 between support clip 1 and 2, and sheet 1 into support clip 3 in this order. Make sure the printed side of sheets is inserted inward.
CAUTION
To identify the correct side of the sheet, locate the “PYRO” mark on the corner of every sheet.
Correct
8.After insert the sheet 2, press down the glass clips and check if they secure the glass sheet properly.
9.Follow steps
WARNING
To prevent heat leaks, make sure you propery reinsert the glass sheets.
�� 10:41:46