Operation
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
➢ It may take a while before you see a full picture.
Plug & Play Feature
When the TV is initially powered On, basic settings proceed automatically and subsequently:
➢The Screen Saver is activated if there is no operating signal for longer than 15 minutes.
1 Press the POWER button on the remote control. |
|
| |
The message Menu language, Store Demo, Channels and Time will be set. |
| Plug & Play | |
i | Menu language, Store Demo, | ||
is displayed. | |||
Channels and Time will be set. | |||
|
| Start | |
|
| Enter |
2Press the ENTER button to enter the language.
Press the ▲ or ▼ button to select language, then press the ENTER button. The message Select “Home Use” when installing this TV in your home. is automatically displayed.
Plug & Play
Select the language of the OSD.
Language | : |
|
English | ||
|
| Español |
|
| Français |
Move 
Enter
3Press the ◄ or ► button to select Store Demo or Home Use, then press the ENTER button.
➢We recommend setting the TV to Home Use mode for the best picture in your home environment.
➢Store Demo mode is only intended for use in retail environments.
➢If the unit is accidentally set to Store Demo mode and you want to return to Home Use (Standard) : Press the Volume button. While the volume OSD is displayed, press and hold the MENU button for 5 seconds.
➢The Screen Saver is activated if there is no remote control key input for longer than 1 minute while Plug & Play is running.
4Press the ▲ or ▼ button to memorize the channels of the selected connection.
Press the ENTER button to select Start.
➢Air : Air antenna signal.
Cable : Cable antenna signal.
Auto : Air and Cable antenna signals.
➢In Cable mode, you can select the correct analog signal source among STD, HRC, and IRC by pressing the ◄ or ► button, then press the ENTER button. If you have Digital cable, select the signal source for both Analog and Digital. Contact your local cable company to identify the type of cable system that exists in your particular area.
Plug & Play
Select “Home Use” when installing this TV in your home.
Store Demo |
| Home Use |
|
Move | Enter | ||
Plug & Play
Select the antenna to memorize.
AirStart
CableStart
AutoStart
Move 
Enter 
Skip
Plug & Play
Selects a cable signal type for your location.
Analog |
| Start |
STD |
| |
HRC |
|
|
IRC |
|
|
Digital |
|
|
STD |
|
|
HRC |
|
|
IRC |
|
|
Move | Enter | Skip |
Continued...
English - 16
