Samsung PL50A440P1D Setting the Blue Only Mode, Reducing the Effects of Screen Burn, White

Setting the Blue Only Mode

This function is for AV device measurement experts.

This function displays the blue signal only by removing the red and green signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Color and Tint of video equipment such as DVD players, Home Theaters, etc.

Using this function, you can adjust the Color and Tint to preferred values appropriate to the signal level of each video device using the Red/Green/Blue/Cyan/Magenta/ Yellow Color Bar Patterns, without using an additional Blue Filter.

1Follow the Activating Picture Options instructions numbers 1 and 2. (Refer to page 26)

2Press the ▲ or ▼ button to select Blue Only Mode, then press the ENTER button.

3Press the ▲ or ▼ button to select Off or On, then press the ENTER button. Press the EXIT button to exit.

➢Blue Only Mode is available when the picture mode is set to Standard or Movie.

Reducing the Effects of Screen Burn

If screen burn has occurred, you can select a white screen or scrolling to help remove screen burn artifacts.

1Follow the Activating Picture Options instructions numbers 1 and 2. (Refer to page 26)

2Press the ▲ or ▼ button to select Screen Burn Protection, then press the ENTER button.

3Press the ▲ or ▼ button to select Pixel Shift, White, Scrolling, or Side Gray then press the ENTER button.

Press the EXIT button to exit.

•White

This function removes after-images on the screen by changing the color of pixels to white. Use this function when there are remaining after-images or symbols on the screen, especially when you displayed a still image on the screen for a long time.

•Scrolling

This function removes after-images on the screen by moving all the pixels on the PDP according to a pattern. Use this function when there are remaining after-images or symbols on the screen, especially when you displayed a still image on the screen for a long time.

•Side Gray

When you watch TV with the screen ratio of 4:3, the screen is prevented from any damage by adjusting the white balance on both extreme left and right sides.

To prevent the screen burn from happening, select Dark or Light.

•Dark : When you set the screen ratio to 4:3, it darkens the left and right sides.

•Light : When you set the screen ratio to 4:3, it brightens the left and right sides.

T V	Picture Options
	Color Tone	: Normal
	Size	: 16:9
	Digital NR	: Auto
	DNle	: Off
	HDMI Black Level	: Low
	Film Mode	: Off
	Blue Only Mode	:	OffOff
	▼ More		On
	Move	Enter		Return

T V	Picture Options
	▲ More
	Screen Burn Protection	►

	Move	Enter	Return
T V	Screen Burn Protection
	Pixel Shift		►
	White		►
	Scrolling		►
	Side Gray	: Light	►
	Move	Enter	Return
T V		Pixel Shift
	Pixel Shift	: On	►
	Horizontal Dot	: 2	►
	Vertical Line	: 2	►
	Time	: 2 min	►
	Move	Enter	Return

➢To remove after-images on the screen, use either the White or Scrolling function. Although both functions remove after-images on the screen, Scrolling is more effective.

➢The after-image removal function has to be executed for a long time (approximately 1 hour) to effectively remove after- images on the screen. If the after-image is not removed after performing the function, repeat the function again.

➢Press any key on the remote control to cancel this feature.

Continued...

English - 30