Setting Up Anynet+
The following settings are to use Anynet+ functions.
To use the Anynet+ Function, Anynet+
1Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Input, then press the ENTER button.
2Press the ▲ or ▼ button to select Anynet+
3Press the ▲ or ▼ button to select Setup, then press the ENTER button.
4Press the ▲ or ▼ button to select Anynet+
5Press the ▲ or ▼ button to select On, then press the ENTER button.
➢The Anynet+
➢If you select Off, Anynet+
➢When the Anynet+
Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off
TV Air 28 |
|
|
|
|
Recevier: | On |
|
|
|
Connect Recorder |
|
|
| |
|
|
|
|
|
Setup |
|
|
|
|
Move Enter | Return |
|
|
|
|
|
|
|
|
| Anynet+ Setup |
| ||
Anynet+ | : OffOff |
| ||
|
|
|
| |
Auto Turn Off |
| : | OffOn |
|
Searching Connections |
|
|
| |
|
|
| ||
Move | Enter | Return | ||
4Press the ▲ or ▼ button to select Auto Turn Off, then press the ENTER button.
5Press the ▲ or ▼ button to select Yes, then press the ENTER button.
➢The Auto turn off function is enabled.
➢If you select No, the Auto turn off function is canceled.
Press the EXIT button to exit.
Anynet+ Setup |
| |||
Anynet+ |
| : On |
| |
Auto Turn Off |
| : OffNo |
| |
Searching Connections |
|
|
| |
| Yes |
| ||
|
|
|
| |
|
|
|
| |
Move | Enter | Return | ||
➢The Select Device setting of the TV remote control is to be set to TV to use the Anynet+ function.
➢If you set Auto Turn Off to Yes, connected external devices are also turned off when the TV is turned off. However, if the device is recording, it may not be turned off.
Scanning and Switching between Anynet+ Devices
1Press the TOOLS button.
➢ Anynet+ devices connected with the TV are listed.
2Press the ▲ or ▼ button to select to a particular device and press the ENTER button. It is switched to the selected device.
3If you cannot find a device you want, press the ▲ or ▼ button to select
Searching Connections, then press the ENTER button.
The message Configuring Anynet+ Connection... is displayed.
When searching devices completes, the connected devices are listed in the Anynet+ menu.
TV Air 28 |
|
|
|
|
Recevier: | On |
|
|
|
Connect Recorder |
|
|
| |
Setup |
|
|
|
|
Move Enter | Return |
|
|
|
|
|
|
|
|
| Anynet+ Setup |
| ||
Anynet+ | : | On | ► | |
Auto Turn Off |
| : | On | ► |
|
|
|
| |
Searching Connections |
|
| ► | |
Move | Enter |
| Return | |
➢Switchingoperation.to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching
➢The time required to scan for devices is determined by the number of connected devices.
➢When the device scan is complete, the number of found devices is not displayed.
➢Although the TV automatically scans devices when it is turned on using the POWER button, devices connected when the TV is already on are not displayed in the device list. In this case, select the Searching Connections menu to search devices.
➢If you have selected external AV device by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the TOOLS button.
