Connecting a VCR
Video Connection
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 9~10). Skip step 1 if you have not yet connected to an antenna or a cable system.
1Unplug the cable or antenna from the back of the TV.
2Connect the cable or antenna to the ANT IN terminal on the back of the VCR.
3Connect an Antenna Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV.
4Connect a Video Cable between the VIDEO OUT jack on the VCR and the AV IN 1 [Y/VIDEO] or AV IN 2 [VIDEO] jack on the TV.
5Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV
IN 1 (or AV IN 2) [R-AUDIO-L] jacks on the TV.
| TV Rear Panel | TV Side Panel |
VCR Rear Panel |
|
|
5 | Audio Cable(Not supplied) |
|
2 |
|
|
4 | Video Cable(Not supplied) |
|
3 | Antenna cable(Not supplied) |
|
➢If you have a “mono”
If your VCR is stereo, you must connect two cables.
➢Each VCR has a different back panel configuration.
➢When connecting a VCR, match the color of the connection terminal to the cable.
➢When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).
Your Samsung TV can be connected to an
(This connection delivers a better picture as compared to a standard VCR.)
1To begin, follow steps
2Connect an
TV.
3Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 2
TV Rear Panel | TV Side Panel |
VCR Rear Panel
1 Antenna cable(Not supplied)
3 Audio Cable (Not supplied)
2
An
➢Each VCR has a different back panel configuration.
➢When connecting a VCR, match the color of the connection terminal to the cable.
English - 13