STEP 2 Spacing (applicable models only)
1. Open the door and locate the provided spacers (x2).
2. Unpack both spacers and attach them to the rear of the refrigerator as shown. They help ventilate air to the rear wall and save power consumption.
STEP 3 Flooring
• The surface to install the refrigerator must support a fully loaded refrigerator.
• To protect the floor, put a large piece of cardboard on each leg of the refrigerator.
• Once the refrigerator is in its final position, do not move it unless necessary to protect the floor. If you have to, use a thick paper or cloth such as old carpets along the movement path.
NOTE
If the refrigerator cannot pass through the entrance due to its size, see the Door removal for entrance section in the Installation chapter.
Installation
English 29
|
| ||
|
| ||
|
|
|
|