Replacement
Water filter (applicable models only)
CAUTION
•Do not use
•Unapproved filters may leak and damage the refrigerator, causing electric shock. Samsung holds no responsibility for any damage that may occur from use of third party water filters.
•The filter indicator ( 
) turns red as a reminder that lets you know it is time to replace the water filter.
1.Shut off the main water supply.
2.Connect the water supply line to the
inlet side of the filter to the end.
3. Connect the dispenser line to the outlet side of the filter.
4. Check if there is any leak. If not, fix the lines with the clips.
5. Put the water filter into place and fix it with the clips.
6. Press and hold Filter Reset for 3 seconds to reset the filter lifecycle.
7. When replacing is complete, flush 1 litre of water to remove impurities from the water line.
CAUTION
When adjusting the length of the water line tubing, make sure to smooth out the cut surface at a right angle. This is to prevent a water leak.
Maintenance
English 53
|
| ||
|
| ||
|
|
|
|