DIGITAL VIDEO RECORDER

1Introduction

DVR COMBO is DVR system using both hard disk drive and VCR tape simultaneous- ly. Record TV reception into hard disk drive while also recording only desired program to VCR tape. Recorded VCR tape can be viewed with residential VCR.

DVR COMBO can play while recording sound and image simultaneously. The system and camera can be monitored and controlled from a remote PC. Together with Samsung Multiplexer, the system can backup only desired image per each channel.

1-1

2Features

■Data on your hard disk can easily be backed up onto video tapes.

●Only particular channels of the multiplexer can be backed up

●Playback of particular channels can be protected

■Picture quality can be adjusted to 4 different levels.

●Very High, High, Normal, and Low

■The number of recording fields per second can be adjusted.

●NTSC : 0.50 ~ 60 fields/s

●PAL : 0.50~50 fields/s

■Recording and playback can be performed simultaneously.■Video and audio can be recorded simultaneously.■It has a timer recording function you can set just like you would your VCR.■Recording can be triggered by alarm sensor input.

■It has a motion detection capability that can raise an alarm or start recording when motion is detected.

■It can be used in conjunction with a multiplexer. SAMSUNG SDM-160(P), 090(P) Multiplexer SOM-080(N/P),SMO-150/210(TRN/TRP)

■It offers various playback speeds.

●1/5, 1/2, 1, 2, 5, 10, 20 baud rate (forward, backward)

■It has convenient search functions.

●Date & Time Search, Record Event Search, Alarm Event Search, and Motion Event Search

●VISS Search

■The Remote Control allows for convenient operation.■Remote monitoring and controlling are possible via LAN connection.

●Network Interface : Ethernet (10 BaseT)

●Protocol : TCP/IP

●Web Server : Screen capture and remote monitoring using a viewer program installed on a PC

■The system boots up automatically and can start recording when power is restored following a power outage during Record mode.

■The system can be controlled remotely through serial communication ports.

●1 RS-232 port

●2 RS-485 ports (up to 32 nodes)

●Control of camera PAN/TILT/ZOOM by the LAN viewer program via RS-485

■Recording status, remaining hard disk space, and in particular current play- back position are displayed in bar format.

■A removable hard drive rack allows you to easily replace hard disk drives.

■Cameras can be controlled and channels can be selected using the Remote Viewer program.

(Applicable only to Samsung products : SCC-641/SCC-643(N/P) Cameras, SCC- 421(N/P) Series Camera(C4201, C4203, C4301 and C4303), and SDM-160(P), 090(P) Multiplexer SOM-080(N/P), SMO-150/210(TRN/TRP)

1-2