DIGITAL VIDEO RECORDER

Record Setup

 

 

3

 

 

 

The following illustrates the intial setting of the RECORD MODE SETUP menu.

 

RECORD MODE SETUP

 

 

 

 

 

 

 

DVR INPUT

VIDEO-IN

 

AUDIO RECORD

ON

 

PICTURE QUALITY

HIGH

 

PICTURE RATE

30.00FPS

 

DISK END MODE

OVERWRITE

 

DISK END BUZZER

ON

 

RECORD TIME MARK

ON

 

TIME MARK POSITION

RIGHT

 

 

 

 

 

MOVE=[ /❷/➛/❿] SELECT=[

] EXIT=[MENU]

①DVR INPUT

Set the 3 types of Video Input signals going into the DVR.VIDEO-IN is the input signal going into the BNC Video Jack, S-VIDEO is the signal going into the S-VHS Jack, and VCR PB is the VCR playback signal. [VIDEO-IN/S-VIDEO / VCR PB]

②AUDIO RECORD

Set to ON to record video and audio at the same time, or set to OFF to record video only. Audio is input and recorded at 6.3 Kbps regardless of the recording field rate of the video

[ON/OFF].➂PICTURE QUALITY

Picture quality is divided into four levels. Set to VERY HIGH for the best picture quality, or set to HIGH, NORMAL, or LOW in the descending order of qualty. The user can select the desired quality. [VERY HIGH/HIGH/NORMAL/LOW]

➃PICTURE RATE

Set the picture rate for the input video. Up to 60 FPS (Fields Per Second) can be recorded. (SCR-3000P models can record up to 50 FPS (Fields Per Second)

●SCR-3000N/SSC-Dual (NTSC) [60.00FPS/30.00FPS/15.00FPS/10.00FPS/7.50FPS/5.00FPS/2.50FPS/1.00FPS/ 0.50FPS]

●SCR-3000P (PAL) [50.00FPS/25.00FPS/12.50FPS/8.33FPS/6.25FPS/5.00FPS/2.50FPS/1.00FPS/ 0.50FPS]

➄DISK END MODE

●If you select STOP, recording will stop when you consume the full HDD space.

●Setting this to OVERWRITE will continue to record the current data by overwriting the previous data. The relative positions where the recorded data are being stored in the HDD will be indicated on the screen in a bar format. If the DISK END MODE is set to STOP, in addition, the remaining HDD capacity will be indicated in percentage (%).

[OVERWRITE/STOP]➅DISK END BUZZER

If set to ON, the Buzzer will sound when the HDD is full during the recording; if set to

OFF, the Buzzer will not sound. DISK END MODE needs to be set to STOP for activation.

[ON/OFF]

➆RECORD TIME MARK

If set to ON, the recording time will be displayed during playback; if set to OFF, it will not be displayed. [ON/OFF]

⑧TIME MARK POSITION

Set the location on the screen where the time of recording will be displayed during playback. Set to LEFT to display it on the bottom left of the screen, or set to RIGHT to display it on the bottom right of the screen. [LEFT/RIGHT]

Note

Set DVR input to VCR PB mode to show video in live video on screen. You can record the videotape into hard disk drive while playing it. Note that OSD will not display while recording. This is normal.

Please note that you cannot open VCR menu while setting the DVR input to VCR PB mode. Timer record setting in DVR menu is disabled as well.

4-7

4-8