DIGITAL VIDEO RECORDER

2Record Lock

Record Lock

REC LOCK

Press the REC LOCK ( ) button during recording to lock the recording. Then, the REC

REC LOCK

LOCK ( ) button will light up. At this time, pressing the STOP ( ) button will not stop

the recording. An icon appears on the top left of the screen when in the Recording Lock mode.

(Please refer to “Viewing Screen during Recording” on p. 3-6.)Record Lock Release

REC LOCK

To cancel the Recording Lock, press the REC LOCK ( ) button.

When the REC LOCK ( REC LOCK ) button lights up, press the STOP ( ) button to stop recording. If the PASSWORD LOCK of the SYSTEM SETUP menu is set to ON, you must enter a password to cancel the recording lock. At this time, if the password entered matches the one set in the PASSWORD of the SYSTEM SETUP menu, then the recording lock will be can- celled; otherwise, it will not be cancelled.

3Alarm Record

Record in Alarm Occurrence

There is an alarm input terminal (ALARM IN) on the external I/O port at the back panel of the DVR COMBO system. Connect here the alarm output terminal of an external device, such as Multiplexer. (For detailed information on connections, please refer to “3. System Connection for Alarm Recording” on p. 2-3.) Next, set the ALARM SIGNAL DETECTION of the ALARM RECORD SETUP menu to ON to begin recording whenever alarm is triggered. Also, set the MOTION DETECTION of the ALARM RECORD SETUP menu to ON to begin the alarm recording whenever a motion is detected within the area set in the SET AREA & SENSITIVITY.

Release of Alarm Record

If the system is not in the alarm recording mode, in order to cancel the alarm recording mode, set the ALARM SIGNAL DETECTION and MOTION DETECTION of the ALARM RECORD SETUP menu to OFF. To force stop the recording during the recording started by an alarm, press and hold the STOP( ) button for 3 seconds. Then, the recording by the current alarm will be stoppted, and the alarm recording will not be performed for the next 5 seconds even if alarm occurs. To completely stop the alarm recording, go into the menu within those 5 seconds to set the ALARM SIGNAL DETECTION to OFF. If no action is performed by the user for 5 seconds, the system returns to the alarm recording mode.

6-3

6-4