DIGITAL VIDEO RECORDER
2Q & A
Question | Answer |
|
|
|
|
• Does recording continues after power cut | – Without power supply, the system can't perform |
|
during recording. | recording. But if the system was recording before |
|
| power cut, it will resume recording upon power sup- |
|
| ply. |
|
|
|
|
• What would become of the system if dis- | – Without connection with the input image signal, the |
|
connected with the input image signal dur- | system can't keep recording. But the system will |
|
ing recording? | resume recording upon the supply of normal input |
|
| image signal. |
|
|
|
|
• What shall I do to stop recording manually | – Press the STOP button ( ) for 3 seconds. |
|
while the system is detecting movements or | Then, recording will be paused for 5 seconds and |
|
in recording mode as set by the alarm. | you shall enter the menu to change the recording |
|
• When system is in Reservation Recording | setup in the meantime. If you want to stop the alarm |
|
state, how to stop the recording intentional- | recording, you shall set the ALARM SIGNAL |
|
ly? | DETECTION of the ALARM RECORD SETUP |
|
| menu to OFF. If you want to stop the reserved | www.securitysamsung.com |
| recording, you shall set the TIMER of the TIMER | |
| RECORD SETUP menu to OFF. Without your |
|
| action against the system for 5 seconds, the system |
|
| will return to the previous mode. |
|
|
|
|
• May I use an itentical IP Address for more | – Yes, but as long as the 2 systems are not connected |
|
than 2 systems? | to LAN simultaneously. Connecting the system to |
|
| LAN one by one is to be connected to the remote |
|
| monitoring program by PC. If you want to connect |
|
| the other system to LAN to be connected to the |
|
| remote monitoring system by PC, you shall discon- |
|
| nect the system currently connected to LAN from |
|
| the remote monitoring system by PC and connect |
|
| the system to LAN. Then resume connection in at |
|
| least one minute. Otherwise, you may not be con- |
|
| nected. |
|
|
|
|
• What should I do if I have forgotten the | – Turn the hard drive rack's key to the OFF position |
|
system's password or ID/password for | and enter the MENU. Then, change the password. |
|
network access? |
|
|
|
|
|
Printed in Korea |