DIGITAL VIDEO RECORDER
1Basic Record
Basic Record①CURRENT IMAGE RECORDREC
Press the RECORD( 
) button to record current image. If doing so, the light of the
REC
RECORD( 
) button turns on and record starts while following message appears on the screen. Settings related with record are done in the RECORD MODE SETUP menu.
O RECORD ON O
Note
-Recording is possible both when the system is in the Live screen mode or in the playback mode. However, whereas the Live screen currently showing will be recorded when the system is in the Live screen mode, the video that is currently being input separate from the screen currently being played will be recorded when the system is in the playback mode.
REC
-While the user is in the menu, pressing the RECORD( 
) button will not start the recording. To start the recording, first exit the menu.
If the incoming video signal is disconnected during recording, recording will be stopped. But, if the incoming video signal is reconnected, the system recognizes this and start to
REC
record again. In addition, when pressing RECORD( 
) button without connecting any video signals to the input port, the following Message is shown on the screen and the system will not carry out the recording function.
O NO VIDEO INPUT O
Press the STOP( ) button to stop recording. Then, the light will go off in the RECORD
REC
( 
) button and recording will stop with the following message on the bottom of the screen.
O RECORD OFF O
Note
Menu screen will not be displayed even if the MENU button is pressed during recording. If the MENU button is pressed during the recording, the following message will appear. To view the menu screen, the recording must be stopped.
O PLEASE STOP RECORD O
If there is a copy protection signal while receiving VIDEO input image from DVD or VIDEO TAPE, it records for a moment and stops recording with "COPY PROTECT" message on the screen.