Receiving Automatically in Ans/Fax Mode
To use this mode, you must attach an answering machine (TAD) to the EXT jack on your fax machine (see page 1.6).
1.Press Rcv.Mode until both Fax and Tel/Fax lamps light.
2.When you get a call, the answering machine answers it. If the caller leaves a message, the answering machine stores the message normally.
If your machine hears a fax tone on the line, fax receive mode is activated.
¥If you have set your machine to Ans/Fax and your answering machine is switched off, or no answering machine is connected to your fax machine, your machine will automatically go into fax receive mode after 10 rings.
¥If your answering machine has a
¥If you are in Tel mode (manual reception) when the answering machine is connected to your machine, you must switch off the answering machine, or the outgoing message from the answering machine will interrupt your phone conversation.
2 Operation
Receiving Manually in Tel Mode
1.Press Rcv.Mode until both Fax and Tel/Fax lamps are off.
2.When the telephone rings, pick up the handset and answer it.
3.If you hear a fax tone, or if the person on the other end asks you to receive a document, press Start.
4.Replace the handset. The machine begins receiving and returns to Standby Mode when reception is complete.
Receiving a Fax 2.21
