If the remote machine is secured with a Poll Code, you must enter the correct code, and press Enter.
OR
If the remote machine is not secured with a Poll Code, press Enter to accept [0000] which represents no code.
6.The display asks you to enter the START and END times. Enter the time your machine starts and ends polling everyday. Enter the time in 24- hour format. For example, enter 2030 for 8:30 PM.
[START → [END] 20:30 → 23:30
Your machine will poll the remote machine(s) regularly, between the start and end times, at the interval you specified in step 8.
7.Press Enter when the time appears correctly in the display. The display asks you to enter the length of time to wait before attempting the next polling.
8.Enter the time interval, then press Enter. For example, to set your machine to poll the remote machine at
INTERVAL TIME
[00:30]
9.The machine returns to Standby Mode and the display shows a reminder that Continuous Polling is set.
start time
After Continuous Polling ends, a
2 Operation
Receiving a Fax 2.25