Samsung SF4500 manual Tone, Recall, Dual

Tone

You may often need to use Touch-Tone dial signals to perform special operations by phone. Bank-by-phone and voice mail are two examples of systems that require these signals. If you have pulse service, you can still send Touch-Tone signals by following these steps.

1.Dial the number using pulse dialling.

2.When the remote phone answers, press . Any numbers you now press will be sent as Touch tones for the remainder of the call.

3.Dial the remaining numbers required by the service. The machine returns to the pulse mode after you finish the call.

Recall

When a call comes in and you want to connect the caller to another person, you can transfer the call by pressing Recall and dialling the number of that other person. This is a timed-break recall facility only, and you may not be able to use to use it with some phone systems. Contact your phone supplier.

1.When you are on the phone and want the caller to be connected to another person, press Recall.

2.Enter the number of the other person.

If you do not have a special service that uses the switch-hook signal, donÕt press Recall during a call. If you do, you could disconnect the line.

Dual

Your machine can perform more than one of its many functions at the same time. For example, you can simultaneously:

¥Receive a fax into memory while making a copy.

¥Store a fax document for later transmission while printing an incoming fax.

When the machine performs dual tasks, Press Dual to toggle the display between the current operation and new operation.

2.34 Other Features