1. Automatic Operation
NOTE
Operation with the Remote Control Unit
This unit automatically switches between cooling operation and heating operation according to the difference between the room temperature and the temperature setting.
STEP 2
STEP 1
Check that the circuit breaker on the power panel is turned on.
Once 
mode is selected and the unit is preset by following the steps below, you can have the air conditioner automatically bring the room to the desired temperature simply by pressing the ON/OFF operation button.
STEP 1 Press the MODE selector button to 
.
STEP 2 | Press the ON/OFF operation button. |
NOTE
To stop the air conditioner, press the ON/OFF operation button again.
•To change the temperature setting; press the temperature setting buttons and change the setting to the desired temperature.
12 | |
|
