Operation without the Remote
Control Unit
INDOOR UNIT | If you have lost the remote control unit or it has trouble, follow the steps below. |
When the air conditioner is not running
Each time the OPERATION button is pressed, the type of operation conducted is indicated by the changing color of the OPERATION lamp. Press the button and select the lamp color that suits your preference for operation.
Cooling operation |
| Heating operation |
| Stop |
|
| |||
(green) |
| (red) |
| (lamp off) |
OPERATION button
NOTE
The temperature is set to the room temperature minus 4 °F during the cooling operation and to the room temperature plus 4 °F during the heating operation, and the fan speed and flap are set to Auto.
Care and Cleaning
1. For safety, be sure to turn the air conditioner off and also to disconnect the power before cleaning.
2.Do not pour water on the indoor unit to clean it. This will damage the internal components and cause an electric shock hazard.
Casing and Grille (Indoor Unit) Clean the casing and grille of the indoor unit with a vacuum cleaner brush, or wipe them with a clean, soft cloth.
If these parts are stained, use a clean cloth moistened with a mild liquid detergent. When cleaning the grille, be careful not to force the vanes out of place.
CAUTION
1.Never use solvents, or harsh chemicals when cleaning the indoor unit. Do not wipe the plastic casing using very hot water.
2.Some metal edges and the fins are sharp and may cause injury if handled improperly; be especially careful when you clean these parts.
3.The internal coil and other components of the outdoor unit must be cleaned every year. Consult your dealer or service center.
22 | |
|
