Sanyo DWM-3500 instruction manual Before Operation, Common Operation

				BEFORE OPERATION				DVD
Common Operation				VOLUME			POWEVCR
ER				VCR/DVD AM/FM -PRESET+				AM/FM
	REC	CHANNEL	EJECT		VOLUME	OPEN/CLOSE
VIDEO IN	L-AUDIO IN-R			STOP PLAY	PLAY		SOUND	INPUT
POWER				VCR/DVDAM/FM		a		–VOLUME+
							BASSENTERBOOST	4
								5

Turning the power on and off

Press [POWER] to turn the power on.

(After connecting the power cord, when you press [POWER] for the first time, the volume-reset feature automatically sets the initial volume level.)

When the power cord is connected to the AC outlet, the unit will respond to commands from the remote control.

To turn the power off, press [POWER] again.

Selecting the source

Remote control operation

Press [VCR] to select the “VCR” function. Press [DVD] to select the “DVD” function. Press [AM/FM] to select the “Tuner” function.

Press [INPUT] repeatedly in the “VCR” function to select the external source connected to AUDIO/VIDEO IN jacks on the front panel or original source.

Notes:

•When the source is selected the “DVD” or “Tuner” function, you cannot use [INPUT] button.

•When the source selection is changed to the “Tuner” function, disc and tape playback automatically stops.

Front panel operation

Press [VCR/DVD] repeatedly to select the “VCR” or “DVD” function.

Press [AM/FM] to select the “Tuner” function.

Adjusting the volume

Rotate [VOLUME] on the front panel (or press [VOLUME] + or – on the remote control). The volume level appears on the FL display (Vol 0 ~ Vol 40).

Note:

Set the TV’s built-in speaker volume to minimum.

Adjusting the bass, treble and speaker level

1.Press [SOUND].

“BA” appears on the FL display.

2.Press [ENTER] repeatedly to select the desired sound mode. Each time [ENTER] is pressed, the sound mode changes as follows:

BA (Bass) v TR (Treble) v FL (Front left speaker) v C (Center speaker) v FR (Front right speaker) v SR (Surround right speaker) v SL (Surround left speaker) v SU (Subwoofer) v BA (Bass)…

3.Press [4] or [5] to adjust the sound level. BA/TR: “+5” ~ “5”–.

FL/FR: “0” ~ “10”–.

C/SR/SL/SU: “+10” ~ “10”–.

4.Repeat steps 2 ~ 3 for another sound mode.

•You can also use the menu screen to adjust the speaker level. See “Adjusting the Speaker and Subwoofer Level” on page E22.

Bass boost system

Press [BASS BOOST].

“BA” appears on the FL display.

Press the button repeatedly to select the bass boost effect ON or OFF.

BA ON v BA OFF v BA ON...

-E20-

2B80201A [E] P17-26 20 24/2/03, 7:13 PM