Sanyo DWM-3500 instruction manual One-touch Timer Recording OTR, To cancel OTR

One-touch Timer Recording (OTR)

The One-touch Timer Recording feature provides a simple and convenient way to make a timed recording.

Preparation:

•Turn ON the TV and set to the video input mode.

•Press [VCR] to select the VCR mode. (The VCR indicator on the front panel will light.)

Example: One-touch Timer Recording for 30 minutes.

1.Load a cassette tape with the erase prevention tab intact. The unit will automatically turn on.

2.Press [TAPE SPEED] to select the desired tape speed SP or SLP.

The tape counter and SP or SLP will appear on the TV screen for approximately 4 seconds.

00 : 00 : 00 SP

3.Set the TV/CATV option to the appropriate position (see “TV/CATV selection” on page E25).

TV: VHF/UHF channels

CATV: CABLE TV channels

4.Press the number buttons [0–9] or [CH] +/– to select the channel to be recordedCH125.

VCR DVD

4

5, 6 2

4

n

(Stop)

5.Press [REC/OTR].

6.Press [REC/OTR] again to stop recording after 30 minutes. Each additional press of [REC/OTR] will increase recording time as shown in the chart below, up to a maximum of 5 hours. The OTR and recording time will appear on the TV screen for approximately 4 seconds. And, REC will keep blinking on the FL display.

OTR 0 : 30

CH 125

INDEX

Press	Recording time	Press	Recording time
once	NORMAL REC	6 times	3:00
twice	0:30	7 times	4:00
3 times	1:00	8 times	5:00
4 times	1:30	9 times	NORMAL REC
5 times	2:00

To cancel OTR

Press [n] or turn off the power.

“n” will appear on the TV screen for approximately 4 seconds.

Note:

If you wish to watch the DVD playback during the OTR, press [DVD] to change to DVD mode and perform the DVD playback (see page E39).

Need help? Call 1-800-813-3435

-E33-

2B80201A [E] P27-37 33 24/2/03, 7:14 PM