Sanyo DWM-3500 Video Cassette Tape Playback, Loading and Unloading a Cassette Tape, qEJECT

VIDEO CASSETTE TAPE PLAYBACK

Loading and Unloading a Cassette Tape			To prevent accidental erasure
Use only video cassette tapes marked	and	.	Remove the erase prevention tab with a screwdriver.

Loading

Push the center of the tape until it is automatically inserted.

Erase prevention tab

Insert the cassette tape with its labeled side facing up and the erase prevention tab positioned at your left. An inverted cassette tape cannot be inserted.

Erase prevention tab

Automatic power ON

When you insert a cassette tape, the unit will turn ON automatically.

Automatic playback

When loading a cassette tape without an erase prevention tab, playback will start automatically.

Unloading

1. Press [q EJECT] on the unit.

POWER

REC CHANNEL EJECT VCR/DVD AM/FM - PRESET + VOLUME OPEN/CLOSE

VIDEO IN L-AUDIO IN-R STOP PLAY

qEJECT

2.Remove the cassette tape.

To record again

Cover the hole with a piece of adhesive tape.

Adhesive tape

Tape speed and maximum recording time

Tape Speed		Video Cassette Tape
	T-160	T-120	T-90	T-60	T-30
SP	2-2/3 hours	2 hours	1-1/2 hours	1 hour	30 minutes
(Standard Play)
SLP	8 hours	6 hours	4-1/2 hours	3 hours	1-1/2 hours
(Super Long Play)

Automatic tape eject

The built-in VCR will automatically rewind the tape when the tape has ended. And when the tape is rewinded to its beginning, the cassette tape will be ejected automatically.

-E27-

2B80201A [E] P27-37 27 24/2/03, 7:14 PM