Manual presetting
1.Press [AM/FM] to select FM or AM.
2.Tune in the station to be preset as described in “Automatic/ Manual Tuning”.
3.Press [SETUP/MENU]. “Preset number” blinks.
4.While “preset number” is blinking, press [PRESET] + or – to select the channel to be preset.
•The number buttons on the remote control can also be used.
•In this example, the channel is “9”.
5.While “preset number” is blinking, press [ENTER]. “Preset number” blinking stops.
6.Press [SETUP/MENU]. “Preset number” disappears.
•In this example, “103.1 MHz” FM station is preset on FM channel 9.
7.Repeat steps above to add more preset stations.
•When presetting a new station, the previous preset station is cleared.
POWER
REC | CHANNEL | EJECT | VCR/DVD AM/FM | - PRESET + | VOLUME | OPEN/CLOSE |
VIDEO IN | STOP | PLAY |
AM/FM |
|
|
|
|
| PRESET +/– |
|
|
|
Number buttons 1
3, 6 5
4
Listening to Preset Stations
1.Press [AM/FM] to select FM or AM.
2.Press [PRESET] + or – briefly to select the desired channel.
•If using the number buttons, press the number button(s), then press [ENTER].
Example:
To select preset number 3, press [0] [3], then [ENTER]. To select preset number 12, press [1] [2], then [ENTER].
Note:
Usually, when receiving the FM stereo broadcast you enjoy FM stereo sound, if the signal from the station becomes weak, the tuner automatically sets to monaural reception.
Number buttons 1
ENTER
2
2B80201A [E] | 62 | 24/2/03, 7:16 PM |
