Setting the Video Channel

To view playback of a recorded tape or DVD disc, or to watch a program selected by the VCR’s channel selector, the TV must be set to channel 3 or 4 (video channel).

When a TV is connected with the 75 ohm coaxial cable only.

1

2

 

5

1.Press [POWER] to turn on the unit.

2.Press [VCR] to select the VCR mode.

The VCR indicator on the front panel will light.

3.Set the channel selector switch on the rear panel to 3 CH or 4 CH.

OUTPUT

DVD/VCR OUTPUT

 

 

VHF/UHF

COMPONENT

 

AM LOOP

 

Y

VIDEO

 

 

IN

 

 

FM 75

 

(ANT)

PB

L

 

 

 

 

AUDIO

AUDIO OUT

 

 

 

(6–CHANNEL)

 

PR

R

OUT

3 CH

4 CH

 

 

( TV)

4.Turn ON the TV and set to channel 3 or 4 to correspond with the channel selected in step 3.

5.Press [TV/VCR] to select the VCR position. “VCR” will appear on the FL display.

6.Select any channel to receive a TV station in your area. The channel number will appear on the screen for approximately 4 seconds.

For a push-button TV tuner

If channel 3 or 4 corresponding to the video channel cannot be tuned on your TV, proceed as follows: set the channel selector switch on the main unit’s rear panel and the TV to 3 CH or 4 CH, play back a prerecorded tape and tune the TV to receive a sharp color picture from the video cassette recorder. Refer to your TV owner’s manual for details.

Setting the Language

You can choose from three different languages (English, Spanish, and French) for the on-screen displays.

1, 5

ENTER

4,5

1.Press [SETUP/MENU].

If you use the unit for the first time and press [SETUP/ MENU], instead of the main menu screen below the “SYSTEM SETUP” menu screen in step 3 may appear.

MENU

 

 

TIMER REC SET

ON

OFF

AUTO REPEAT

SAP

ON

OFF

CH SETUP

 

 

SYSTEM SETUP

 

 

SPEAKER SETUP

 

 

TVGuardian SETUP 〈4/5/ENTER/MENU

2.Press [4] or [5] to select “SYSTEM SETUP”, then press [ENTER].

3.Press [4] or [5] to select “LANGUAGE/IDIOMA/LANGUE”, then press [ENTER].

SYSTEM SETUP

CLOCK SET

LANGUAGE/IDIOMA/LANGUE

NO NOISE BACKGROUND

ON OFF

AUTO CLOCK ON OFF

STANDARD TIME

DAYLIGHT SAVING TIME

〈4/5/ENTER/MENU

4.Press [4] or [5] to select the desired language: English (ENGLISH), Spanish (ESPAÑ OL) or French (FRANCAIS), then press [ENTER].

〈4/5/ENTER/MENU

5. Press [SETUP/MENU] until the menu screen is cleared.

Notes:

Both the VCR and the DVD have their own menu (see page E56).

If no buttons are pressed for more than 60 seconds, the MENU screen will return to normal TV-operation automatically.

-E24-

2B80201A [E] P17-26

24

24/2/03, 7:14 PM

Page 25
Image 25
Sanyo DWM-3500 instruction manual Setting the Video Channel, Setting the Language, For a push-button TV tuner